Changing The Strap - Acer L05 User Manual

f. Touch screen
Tap and hold: turn on the backlight
g. Quick key
Turn on the backlight
This function may be changed in the Device section of the Liquid
Life app
h. LED
i. Electrode pad
j. Electrode pads
k. Heart rate sensor
Make sure you remove the protective film from this
sensor
l. Charging pins

Changing the strap

You may change the strap attached to the Leap Ware.
Open the spring latch at the top of both straps to remove the old strap.
1. Slide one end of the spring
bar of the new strap into the
hole in the watch body.
2. Use the latch to retract the pin
on the spring bar.
3. Slide the strap into position
and release the latch so the
strap locks into place.
4. Repeat for the second part of
the strap.
Care and wearing tips
• When using the flashlight, wear the device on your left wrist.
• Position the Leap Ware so the strap is two finger-
widths from the base of your palm. The face should
be a short distance from your wrist bone (ulna).
1
2
Setting up - 7
3