Download Print this page

Advertisement

Quick Links

INSTRUCTION MANUAL FOR WIRE WELDING MACHINE

IMPORTANT:
BEFORE STARTING THE EQUIPMENT,
READ THE CONTENTS OF THIS MANUAL, WHICH MUST
BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR
THE ENTIRE OPERATIVE LIFE-SPAN OF THE MACHINE.
THIS EQUIPMENT MUST BE USED SOLELY FOR WELD-
ING OPERATIONS.
1 SAFETY PRECAUTIONS
WELDING AND ARC CUTTING CAN BE
HARMFUL TO YOURSELF AND OTHERS.
The user must therefore be educated
against the hazards, summarized below, deriving from weld-
ing operations. For more detailed information, order the
manual code 3.300.758
NOISE
This machine does not directly produce noise
exceeding 80dB. The plasma cutting/welding proce-
dure may produce noise levels beyond said limit;
users must therefore implement all precautions required by
law.
ELECTRIC AND MAGNETIC FIELDS - May be dangerous.
· Electric current following through any con-
ductor causes localized Electric and Magnetic
Fields (EMF). Welding/cutting current creates
EMF fields around cables and power sources.
· The magnetic fields created by high currents
may affect the operation of pacemakers. Wearers of vital
electronic equipment (pacemakers) shall consult their physi-
cian before beginning any arc welding, cutting, gouging or
spot welding operations.
· Exposure to EMF fields in welding/cutting may have other
health effects which are now not known.
· All operators should use the followingprocedures in
order to minimize exposure to EMF fields from the weld-
ing/cutting circuit:
- Route the electrode and work cables together - Secure
them with tape when possible.
- Never coil the electrode/torch lead around your body.
- Do not place your body between the electrode/torch
lead and work cables. If the electrode/torch lead cable
is on your right side, the work cable should also be on
your right side.
- Connect the work cable to the workpiece as close as
possible to the area being welded/cut.
- Do not work next to welding/cutting power source.
EXPLOSIONS
· Do not weld in the vicinity of containers under pres-
sure, or in the presence of explosive dust, gases or
fumes. · All cylinders and pressure regulators used in
welding operations should be handled with care.
ELECTROMAGNETIC COMPATIBILITY
This machine is manufactured in compliance with the
instructions contained in the standard IEC 60974-10 (CL. A),
and must be used solely for professional purposes in an
industrial environment. There may be potential difficul-
ties in ensuring electromagnetic compatibility in non-
industrial environments.
DISPOSAL OF ELECTRICAL AND ELECTRONIC
EQUIPMENT
Do not dispose of electrical equipment together
with normal waste!In observance of European
Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with
national law, electrical equipment that has reached the
end of its life must be collected separately and returned
to an environmentally compatible recycling facility. As the
owner of the equipment, you should get information on
approved collection systems from our local representa-
tive. By applying this European Directive you will improve
the environment and human health!
IN CASE OF MALFUNCTIONS, REQUEST ASSISTANCE
FROM QUALIFIED PERSONNEL.
1.1 WARNING LABEL
The following numbered text corresponds to the label
numbered boxes.
B. Drive rolls can injure fingers.
C. Welding wire and drive parts are at welding voltage
during operation — keep hands and metal objects
away.
1
Electric shock from welding electrode or wiring can
kill.
1.1 Wear dry insulating gloves. Do not touch electrode
with bare hand. Do not wear wet or damaged gloves.
1.2 Protect yourself from electric shock by insulating
yourself from work and ground.
7

Advertisement

loading
Need help?

Need help?

Do you have a question about the EVO 160 M COMBI and is the answer not in the manual?

Questions and answers

Summary of Contents for Cebora EVO 160 M COMBI

  • Page 1: Instruction Manual For Wire Welding Machine

    INSTRUCTION MANUAL FOR WIRE WELDING MACHINE IMPORTANT: BEFORE STARTING THE EQUIPMENT, DISPOSAL OF ELECTRICAL AND ELECTRONIC READ THE CONTENTS OF THIS MANUAL, WHICH MUST EQUIPMENT BE STORED IN A PLACE FAMILIAR TO ALL USERS FOR Do not dispose of electrical equipment together THE ENTIRE OPERATIVE LIFE-SPAN OF THE MACHINE.
  • Page 2 Never place any filtering device over the air intake points 1.3 Disconnect input plug or power before working on of this welding machine. machine. The warranty shall become void if any type of filtering Breathing welding fumes can be hazardous to your device is used.
  • Page 3 IEC 61000-3-11 - IEC 61000-3-12. setting the switch 47 to "O" (off). N° Serial number, which must always be indi- The yellow-green wire must be connected to the earth cated in any inquiry regarding the welding terminal. Connect the earth clamp 37 to the part to be machine.
  • Page 4 to be welded. — For welding ALLUMAN: 3÷5% silicon wire — For welding ANTICORODAL: 3÷5% silicon wire — For welding PERALUMAN: 5% magnesium wire — For welding ERGAL: 5% magnesium wire Use grinding wheels and brushes specifically designed for aluminium, and never use them on other materials. REMEMBER that cleanliness is quality! The wire reels must be stored in nylon bags with dehu- midifying packets.
  • Page 5 replace. TROUBLESHOOTING GUIDE • Strictly avoid striking the torch or allowing it to suffer violent impact. ANOMALIA PROBABILE CAUSA RIMEDIO 7.2 MAINTENANCE The wel- Line fuse blown Replace line fuse ding Burnt out diode or diodes Replace machine Any maintenance operation must be carried out by qua- supplies Burnt out electronic board Replace...
  • Page 6 QUESTA PARTE È DESTINATA ESCLUSIVAMENTE AL PERSONALE QUALIFICATO. THIS PART IS INTENDED SOLELY FOR QUALIFIED PERSONNEL. DIESER TEIL IST AUSSCHLIEßLICH FÜR DAS FACHPERSONAL BESTIMMT. CETTE PARTIE EST DESTINEE EXCLUSIVEMENT AU PERSONNEL QUALIFIE. ESTA PARTE ESTÁ DESTINADA EXCLUSIVAMENTE AL PERSONAL CUALIFICADO. ESTA PARTE È...
  • Page 9 pos DESCRIZIONE DESCRIPTION pos DESCRIZIONE DESCRIPTION 01 MANOPOLA KNOB 26 LATERALE FISSO FIXED SIDE PANEL 02 MANOPOLA KNOB 27 ASSALE AXLE 03 CORNICE FRAME 28 RUOTA FISSA FIXED WHEEL 04 CHIUSURA CLOSING 29 MOTORE MOTOR 05 MANICO HANDLE 30 VENTOLA 06 LATERALE MOBILE HINGED SIDE PANEL 31 SUPPORTO...
  • Page 10 CEBORA S.p.A - Via Andrea Costa, 24 - 40057 Cadriano di Granarolo - Bologna - Italy Tel. +39.051.765.000 - Fax. +39.051.765.222 www.cebora.it - e-mail: cebora@cebora.it...