1. Manuals
  2. Brands
  3. hayneedle Manuals
  4. Artificial Pine Trees
  5. EWB003
  6. Assembly instructions

hayneedle EWB003 Assembly Instructions

Christmas tree
Hide thumbs
1
2
3
4

Advertisement

Table of Contents

Assembly Instructions For Christmas Tree
YOUR NEW INCLUDES THE FOLLOWING FEATURES
 Super-bright bulbs
 Professionally wrapped light strings
 Easy, fast assembly and disassembly
 Flame-retardant, natural looking tree
 Reusable storage carton

Assembling your tree:

1. Open and secure the positioning of the tree stand by fastening the screws at the
base of the stand.
2. Insert the bottom section of the tree into the stand, and secure it by fastening the
screws tightly at the top of the stand.
3. Attach the middle 1 section of the tree to the bottom section by inserting the base
of the middle 1 section into the top of the bottom section.
4. Attach the middle 2 section of the tree to the middle 1 section by inserting the base
of the middle 2 section into the top the middle 1 section.
5. Attached the top section of the tree (tree top) to the middle 2 section by inserting
the base of the top section into the top of middle 2 section.
6. Allow branches to fall into place and gently pull out and down. When adjusting
branches, be sure that all wires are free of branch hinges.
7. Locate the extension cords and connect together as indicated in diagram. Plug the
long extension cord into the wall. If bulbs do not light, search for loose plug or
missing bulbs and replace any defective bulbs.
8. Unplug the lights and shape your tree.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EWB003 and is the answer not in the manual?

Questions and answers

Summary of Contents for hayneedle EWB003

  • Page 1 Assembly Instructions For Christmas Tree YOUR NEW INCLUDES THE FOLLOWING FEATURES  Super-bright bulbs  Professionally wrapped light strings  Easy, fast assembly and disassembly  Flame-retardant, natural looking tree  Reusable storage carton Assembling your tree: 1. Open and secure the positioning of the tree stand by fastening the screws at the base of the stand.
  • Page 2 -Connect the male and female plug with yellow label of top and Middle sections. CAUTION: IF CONNECT OTHER LIGHTING STRINGS OR DECORATIVE OUTFITS END-TO-END UP TO A MAXIMUN OF 210 WATTS (1.75Amps) TOTAL, PLEASE USE ADDITIONAL EXTENSION CORD TO PLUG INTO THE WALL OUTLET. INSERT THE MALE PLUG WITH RED LABEL OF MIDDLE 2 INTO Middle 2 FEMALE PLUG OF ADDITIONAL EXTENSION CORD.
  • Page 3 STORAGE: 1. Unplug extension cord from the wall outlet. 2. Unplug each section of extension cord. 3. Gently lift off the top and middle sections, and remove the bottom section from the tree stand. 4. Carefully place the tree in its box and tape it shut. Store box in a cool dry and place the temperature does not exceed 100 °F.

Table of Contents