Restarting The Mmi System (Reset) - Audi TTS Coupe 2015 Owner's Manual

Voice guidance during calls: Refer to
�page 164, Voice guidance.
Volume of spoken cues: Turn the rotary pushbut­
ton to adjust the volume of the spoken cues
while route guidance is active.
Entertainment fader: This option allows the vol­
ume of the current audio source to be temporari­
ly reduced when the parking aid is active or while
a navigation cue is being played.
Announcements
Traffic announcements: Refer to�
DAB announcements*: Refer to�
Volume of announcements: You can adjust the
volume of a traffic announcement by turning the
rotary pushbutton.
Speech dialogue system
Short dialogue: This option can be switched on/
off. When it is activated, the spoken cues played
by the system are shortened.
Speech dialogue system volume: Turn the rotary
push button to adjust the volume of the spoken
cues.
Parking aid*
Turn the rotary pushbutton to adjust the volume
of the beeps.
- To adjust the front volume: Select and confirm
high, medium or low.
- To adjust the rear volume: Select and confirm
high, medium or low.
MMI touch
Turn the rotary push button to adjust the volume
of the MMI touch's spoken cues.
Audi heartbeat
Turn the rotary pushbutton to adjust the volume
of the Audi heartbeat.
0
N
co
.....
\D
IJl
.....
.....
\D
Restarting the MMI
system (Reset)
page 173.
Fig. 175
page 173.
.,. Briefly press the rotary push button and
taneously
wards�
Notes on software
Licences
Information on the MMI system's software and
its licence conditions is available on the MMI. Se­
lect:
ton > System maintenance > Version informa­
tion. Or: On the Internet at www.audi.com/soft­
wareinfo.
You can view information about the instrument
cluster's software and licence conditions in your
driver information system by pressing the reset
button twice in the first five seconds after switch­
ing on the ignition.
Combination of buttons for restart
press the two rocker switches up­
Fig. 175.
IM
I
button > Settings> left control but­
ENU
System settings
simul­
207