Separating The Device From Your - Samsung YP-N1 User Manual

SEPARATING THE DEVICE FROM YOUR VEHICLE
1. Pull the both sides of fi xing parts of the cradle
outward and separate the main unit from the
cradle.
2. Pull the locking tab in the direction of the
arrow shown by the fi gure.
The suction cup is released.
3. Remove the suction cup by holding the
projected part.
The cradle is separated.
Install the cradle to a position that does not block driver's fi eld of vision and
will not cause an injury of the driver or follow passenger even if it falls.
CAUTION
Note that the adsorption of the suction cup may decrease when the
temperature difference between outside and inside is high.
Separate the cradle from the vehicle for long time of no use.
The adsorption of the suction cup is the best when the temperature of the
inside car is between 10~50ºC.
NOTE
18 _ the basics