•
After
installation,
the
right
appear.
Click Finish and then the
indicator
lamp
will
turn on.
Now you can work with USB
PC
Camera.
4. Connecting the camera with PC [ ]
• If you connect the camera with PC before software installation
! Note
: If you connect the camera with PC before software
installation,
installation
recommended that you
should click Cancel during the following •-• stage and
disconnect
the camera with PC, and then install the software first
"Add
•
New
Hardware
window
will appear. Click Next to
continue.
• Choose "Search for the best
driver for your device
(Recommended)". Click Next.
successful
window
will
of
camera
error
may
Wizard"
- 7 -
occur.
Therefore
ENH-se06.jpg
it
is
ENH-se02.jpg
ENH-se03.jpg