CHAPTER 3: INSTALLATION
2.
Right-click the Local Area Connection icon and select Properties.
3.
Select the Internet Protocol (TCP/IP) item from the list, and click the Properties button.
4.
Click the "Use the following IP address" box.
5.
Enter an IP address with the first three numbers the same as the IP address of the T60 relay and the last number
different (in this example, 1.1.1.2).
6.
Enter a subnet mask equal to the one set in the T60 (in this example, 255.0.0.0).
7.
Click the OK button to save the values.
T60 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
ADD DEVICE TO SOFTWARE
3-53
3