Rack-Mounting Procedures At A Glance - HPE JH390A Installation Manual

Figure 6 2U chassis rail and short slide rail
(1) Chassis rail
Figure 7 1U chassis rail and long slide rail
(1) Chassis rail

Rack-mounting procedures at a glance

Figure 8 Rack-mounting procedure
NOTE:
If a rack shelf is available, you can put the switch on the rack shelf, slide the switch to an appropriate
location, and attach the switch to the rack with the mounting brackets.
•
Follow these guidelines when you install the switch in a 19-inch rack:
•
The distance between the front and rear posts of the rack must meet the requirements
described in
•
To secure the switch to the rack, you must install not only mounting brackets, but also chassis
rails and slide rails.
Table 6.
(2) Slide rail
(2) Long slide rail
10