NEC Express 5800 Series User Manual page 21

BMC Configuration User's Guide
Item Description
Management LAN Management LAN setting
Management Set and display LAN port to communicate with BMC. You can
LAN modify this setting only on BMC Configuration of Off-line TOOL.
*1 *2
Connection Type Set and display the connection type of the management LAN.
When Management LAN is "Shared BMC LAN", you can modify
this setting only on BMC Configuration of Off-line TOOL. *1
BMC MAC MAC Address of the management LAN is displayed.
Address
DHCP Determine whether to dynamically obtain an IP address from a
DHCP server. If the item is set Enable and applied, BMC set the
value obtained from DHCP server on "IP Address", "Subnet
Mask" and "Default Gateway".
IP Address Set the BMC IP address of the management LAN.*4
Subnet Mask Set the Subnet Mask of the management LAN. *3 *4
Default Gateway Set the Default Gateway IP Address of the management LAN. *4
If you set this item, it is necessary for applying configuration
information that the gateway is connected on network.
Dynamic DNS Determine whether to enable/disable of Dynamic DNS. *5 *12
DNS Server Set the DNS Server. *12
Host Name Set the Host Name. *6 *7 *12
Domain Name Set the Domain Name. *7 *12
GUID GUID of the managed server is displayed. *10 *12
Access Limitation Access Limitation setting *12
Access Select the Access Limitation Type.
Limitation Type
IP Address Set the IP Address to allow or deny to access with the
management LAN. *8 *9
Management LAN
: LAN port for BMC exclusive use.
Shared BMC LAN
: LAN port of System (OS) is shared and used.
Auto Negotiation
: Connecting by suitable setting.
1Gbps Full
: Connecting by Full Duplex at speed of 1Gbps. *10
1Gbps Half
: Connecting by Half Duplex at speed of 1Gbps. *10
100Mbps Full
: Connecting by Full Duplex at speed of 100Mbps.
100Mbps Half
: Connecting by Half Duplex at speed of 100Mbps.
10Mbps Full
: Connecting by Full Duplex at speed of 10Mbps.
10Mbps Half
: Connecting by Half Duplex at speed of 10Mbps.
Allow All
: Access to BMC is not limited.
Allow Address
: Set the IP Address that is allowed to access BMC.
Deny Address
: Set the IP Address that is limited to access BMC.
Default Value
Management LAN
Auto Negotiation
Blade Server:
Enable
Other server:
Disable
192.168.1.1 [*11]
255.255.255.0
0.0.0.0
Disable
0.0.0.0
Blank
Blank
Allow All
Blank