Advertisement

Elite Pro
User Manual Item no: 5150201
Need Help? Email: Service@XRockerNation.co.uk
Phone: 01274 683 109 www.XRockerNation.co.uk
IMPORTANT: You must keep your original retail receipt as proof of purchase.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elite Pro and is the answer not in the manual?

Questions and answers

Summary of Contents for XROCKER Elite Pro

  • Page 1 Elite Pro User Manual Item no: 5150201 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase.
  • Page 2 Welcome to X Rocker! Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio! To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking! Table of contents...
  • Page 3 B1 - 3m RCA to RCA Audio cable 9.84ft/3m 3.28ft/1m B2 - 1m 3.5mm to 3.5mm Audio cable B3 - RCA female to female adapters B4 - 15cm RCA to 3.5mm audio cable B5 – 15cm 3.5mm to 3.5mm audio cable 0.492ft/0.15m B6 –...
  • Page 4: Wireless Connection Guide: Tv (All Consoles

    Wireless connection guide: TV (All consoles) To connect using the wireless transmitter, connect the Wireless transmitter (B7) to your TV set using the 3.5mm to 3.5mm cable (B2/B5) TV/Mobile/Tablet Once connected, Set the control panel on the chair and the Wireless transmitter to the same band (1,2,3) To get the best sound, make sure that the volume on the TV is set to approximately 50% of the maximum.
  • Page 5: Wired Connection Guide: Tv (All Consoles

    Wired connection guide: TV (All consoles) TV/Mobile/Tablet 1. Connect B1 Cable to X Rocker control panel RCA INPUT sockets 2. Connect B3 RCA adapters to other end of B1 RCA cable 3. Connect B4 RCA cable to B3 Adapter. 4. Connect B4 3.5mm end into the headphone socket of your Television 5.
  • Page 6: Connect By Controller (Ps4 Systems Only

    Connect by controller: (PS4 systems only) 1. Connect the B2 cable to the bottom of the PS4 controller via the headset socket. 2. Connect the other end of the B cable to the chair via the green port. 3. With the PS4 turned on, go to the main menu (or locate the main menu screen).
  • Page 7: Bluetooth Connection Guide

    Bluetooth connection guide: (Mobile phones/tablet devices) Step 1: Switch the X Rocker Elite Pro’s wireless switch to the Bluetooth position. Step 2: On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for XROCKER.
  • Page 8 Troubleshooting tips Issue Troubleshooting steps No power going to control panel • Make sure that the power cable is connected correctly. • Make sure that the power supply at the power source is working correctly. • With the chair turned to the ON position, give the power cable a slight wiggle in the port.
  • Page 9: Health And Safety Information

    Health and safety information • Avoid immersing or allowing the X Rocker to come into contact with liquids. • Please consult X Rocker Support before unscrewing any of the electrical components on the chair. • Please be mindful of any cabling laid out between the X Rocker and power source/audio device.
  • Page 10: Power Supply Safety Information

    Power supply safety information...
  • Page 11 Need Help? Email: Service@XRockerNation.co.uk Phone: 01274 683 109 www.XRockerNation.co.uk IMPORTANT: You must keep your original retail receipt as proof of purchase.

Table of Contents