Configuring Mac Address Learning - HP FlexNetwork HSR6600 Configuration Manual

Comware 7 mpls
Hide thumbs Also See for FlexNetwork HSR6600:
Table of Contents

Advertisement

Step
5.
Configure an LDP PW and
enter VSI LDP PW view.
6.
Configure a backup LDP PW
and enter VSI LDP backup
PW view.
7.
Return to user view.
8.
Manually switch traffic of the
specified PW to its backup
PW.

Configuring MAC address learning

Step
1.
Enter system view.
2.
Enter VSI view.
3.
Enable MAC address learning
for the VSI.
4.
Set the maximum number of
MAC addresses that the VSI
can learn.
Enabling SNMP notifications for L2VPN PW
This feature enables L2VPN to generate SNMP notifications when PW deletions, PW switchovers, or
PW status changes occur. For L2VPN event notifications to be sent correctly, you must also
configure SNMP on the device. For more information about SNMP configuration, see the network
management and monitoring configuration guide for the device.
To enable SNMP notifications for L2VPN PW:
Step
1.
Enter system view.
2.
Enable SNMP notifications
for L2VPN PW.
Command
peer ip-address [ pw-id pw-id ]
[ hub | no-split-horizon |
pw-class class-name |
tunnel-policy tunnel-policy-name ]
*
backup-peer ip-address [ pw-id
pw-id ] [ pw-class class-name |
tunnel-policy tunnel-policy-name ]
*
return
l2vpn switchover peer ip-address
pw-id pw-id
Command
system-view
vsi vsi-name [ hub-spoke ]
mac-learning enable
mac-table limit mac-limit
Command
system-view
snmp-agent trap enable l2vpn
[ pw-delete | pw-switch |
pw-up-down ] *
454
Remarks
By default, no LDP PWs exist.
By default, no backup LDP PW
exists.
If both the default PW ID in the
default-pw-id command and a
PW ID in the backup-peer
command are configured, the
PW ID in the backup-peer
command is used. If only the
default PW ID is configured, the
default PW ID is used. If no
default PW ID is configured, you
must provide a PW ID in the
backup-peer command.
N/A
N/A
Remarks
N/A
N/A
By default, MAC address learning
is enabled for a VSI.
By default, the number of MAC
addresses that a VSI can learn is
not limited.
Remarks
N/A
By default, SNMP notifications for
L2VPN PW are disabled.

Advertisement

Table of Contents
loading

Table of Contents