Configuration Of Smt-2100C Main Board - Samsung SMT-R2000 User Manual

CHAPTER 2.
Disassembly
This chapter describes how to disassemble and assemble SMT-R2000.

2.1 Configuration of SMT-2100C Main Board

The configuration of the SMT-R2000 main board is as shown in the figure below:
Item
WAN/LAN/SIO
FLASH
Ethernet PHY
SDRAM
CPU
RF Part(2.4/5 GHz)
Antenna Connector
© SAMSUNG Electronics Co., Ltd.
Assembly and
WAN
LAN
Ethernet PHY
SDRAM
Figure 2.1 Configuration of SMT-R2000 Main Board
Table 2.1 Main Board Parts
Ports for connecting to WAN/LAN/SIO
BOOT/Application image storage memory
PHY CHIP for connecting to Ethernet 10/100 based
Application-operation memory
Main processor of SMT-R2000
RF part for supporting 802.11a/b/g
Connector for connecting to built-in antenna
SMT-R2000 Service Manual
SIO
FLASH
RF Part(2.4 Ghz)
CPU
RF part(5 Ghz)
Description
Antenna
Connector
2-1