Installing Usb Drivers For Levelogger 4 Software - Solinst Levelogger 3001 User Manual

NOTE
Do not install generic drivers that
Windows will locate. Generic
drivers are completely incompatible
with Solinst USB devices.
NOTE
After plugging in the USB device, if
the Found New Hardware Wizard
does not automatically appear,
proceed to the Manual USB
Installation instructions in Section
4.1.4.
Levelogger Series User Guide - Software Version 4

4.1.3 Installing USB Drivers for Levelogger 4 Software

Levelogger Software Version 4.0.3, for use with Solinst USB Optical Reader,
PC Interface Cable and Leveloader, comes equipped with USB drivers for:
Windows XP, Vista, and 7.
4.1.3.1 USB Installation for Windows XP
1) Plug the USB device into the computer, and Windows will automatically detect
the connected device. This will begin the 'Found New Hardware Wizard'.
2) The 'Wizard' will give the option to connect to Windows Update to search for
software components, select: 'No, not at this time'.
3) Click 'Install from a list or specific location', then click the 'Next' Button.
(Figure 4-1).
Figure 4-1 Found New Hardware Wizard Window
4) Select the installation option, 'Include this location in the search' (Figure 4-2),
then click the 'Browse' Button to search for the appropriate directory:
C:\Program Files\Solinst\Levelogger4_0\USB Drivers
Figure 4-2 Found New Hardware Window and Figure 4-3 Browse for Folder Window
Page 16