Setting Up And Starting Digitone - Elektron Digitone Quick Manual

5. MIDI OUT/SYNC A, MIDI data output. Can also be configured to send DIN sync to
legacy instruments. Use a standard MIDI cable to connect to MIDI In of an external
MIDI device.
6. MIDI IN, MIDI data input. Use a standard MIDI cable to connect to MIDI Out of an
external MIDI device.
7. INPUT L/R, Audio inputs. Use a 1/4" mono phone plug (unbalanced connection).
8. OUTPUT L/R, Main audio outputs. Use either 1/4" mono phone plug (unbalanced
connection) or 1/4" Tip/Ring/Sleeve phone plug (balanced connection).
9. HEADPHONES Audio output for stereo headphones. Use 1/4" Tip/Ring/Sleeve phone
plug.

2.3 SETTING UP AND STARTING DIGITONE

Make sure you place the Digitone on a stable support, such as a sturdy table, with suf-
ficient space for the cables. Make sure to switch off all devices before you connect the
Digitone to other devices.
1. Plug the supplied DC adapter into a power outlet and connect the small plug to the 12 V
DC In on the Digitone.
2. Connect OUTPUT L/R from the Digitone to your mixer or amplifier.
3. To control the Digitone from a computer, connect a USB cable between the computer
and the USB connector of the Digitone.
4. If you want to use MIDI to control the Digitone, connect the MIDI OUT port of the
device you wish to send data from to the MIDI IN port of the Digitone. The MIDI THRU
port duplicates the data arriving at the MIDI IN port so that it can forward data to other
MIDI units. Connect the MIDI OUT port of the Digitone to the MIDI IN port of the of the
device you want to control if you want to use Digitone to control other devices using MIDI.
5. Connect an audio source to INPUT L/R or via USB if you want to process audio from
external sources.
6. Switch on all units. Press the POWER switch located at the back of the Digitone to
switch it on.
15