Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Satamatics SAT-202C-020
- Page 1 User Manual Document No: MAN-0034 Issue No: Dated: 21st April 2009...
- Page 2 It must not be reproduced in whole or in part except with the consent in writing of Satamatics Ltd and then only on the condition that this notice is included in any such reproduction.
- Page 3 General Purpose I/O ......................19 INTERPRETING THE INDICATOR ....................20 APPENDIX – A ...........................21 12.1 CE Declaration of Conformity ...................21 APPENDIX – B ...........................22 13.1 Inmarsat Type Approval....................22 APPENDIX – C ...........................23 14.1 Product Information......................23 © Satamatics Ltd. Page 3 of 24...
-
Page 4: Legal Information
Satamatics warrants that the SAT-202 product will be free from defects in material and workmanship for a period of one (1) year from date of purchase. During the warranty period Satamatics Ltd will, at its option, either repair or replace products that prove to be defective. If a defect exists, at its option Satamatics Ltd will repair the... -
Page 5: Safety Warnings
20 centimetres is normally maintained between the transmitter's radiating structures and the body of the user or nearby persons.) © Satamatics Ltd. Page 5 of 24... -
Page 6: Regulatory And Type Approval Information
Compass Safe Distance: 10.5 cm 3.3 FCC Authorisation The following information is provided on the device covered in this document in compliance with FCC regulations: Model number: SAT-202 (all variants) Company Name: Satamatics Ltd. Miller Court Severn Drive Tewkesbury Business Park Tewkesbury... -
Page 7: Limitations On Intended Operating Environment
Collecting electrical and electronic equipment and waste prevents the potential contamination of nature with the hazardous substances that may be present in electrical and electronic products and equipment. Your Satamatics Dealer/Distributor will assist and advise you of the correct way of disposal in your country. © Satamatics Ltd. -
Page 8: Sat-202 General Description
SCADA exception reporting. (If you require battery backup, solar panel power inputs or 4-20mA analogue output drivers then contact Satamatics for information on the GEM-100 expansion module.) The SAT-202 utilises five INMARSAT satellites providing Global Coverage. Each satellite covers an ‘Ocean Region’... - Page 9 SAT-202 Series User Manual MAN-0034 Issue 1 Figure 3 - SAT-202C-020 Figure 4 - SAT-202E-020-MF Side Entry Terminal The SAT-202E-020-MF incorporates three magnetic mounting feet for use as a portable solution. IMPORTANT: The SAT-202E-020-MF magnetic feet are not designed for fitting to vehicles driven at speed or over rough terrain.
-
Page 10: Installation
The maximum cable diameter must not exceed 7mm. The SAT-202 is supplied without cable or mating connector as standard. The SAT-202C-020 and SAT-202E-020-MF terminate on an IMC connector. Suitable cables and/or connectors can be purchased separately from your equipment supplier or authorised dealer. -
Page 11: Location
Fit the supplied rubber pads to the base of the SAT-202E-020-MF to avoid any excessive damage to the vehicle. The SAT-202 & SAT-202C-020 variants may be mounted by using either the three outer M4 mounting holes or the M25 thread on the base. - Page 12 SAT-202 Series User Manual MAN-0034 Issue 1 Figure 5 - SAT-202 M4 Drilling Diagram (not to scale) Figure 6 - SAT-202 M25 Drilling Template (not to scale) Page 12 of 24 © Satamatics Ltd.
- Page 13 SAT-202 Series User Manual MAN-0034 Issue 1 Figure 7 - SAT-202C-020 M25 Drilling Template (not to scale) Figure 8 - SAT-202 Foam Washer Dimensions (not to scale) © Satamatics Ltd. Page 13 of 24...
-
Page 14: Applying Power
Providing that your terminal has been activated and set up within an application, the data will be available within about one minute of the actual transmission, although this is dependent on the operation of the software being used by your service provider as well as the link to the Satamatics server. -
Page 15: Functionality
8.2 Technical Support and Information For technical support, product queries and information please contact your equipment supplier or authorised dealer. Authorised dealers and general information about Satamatics products and services can be found at: http://www.satamatics.com © Satamatics Ltd. Page 15 of 24... -
Page 16: Specifications
Hot start <1s (GPS was off for less than 2 hours) Accuracy (SA Off) Position (CEP, 2D) 2.5m (Typical) Altitude maximum 12000m Dynamic capability Velocity maximum 310m/s (default portable mode) Acceleration Maximum update rate Page 16 of 24 © Satamatics Ltd. - Page 17 Analog input (12 bit ADC, 0 to 2.5V) Digital output (3.3V, 330uA typical) 1 x Open drain output 250mA max sink current Power Consumption (Typical@12V) Sleep 0.75mW Receive (incl. GPS) Transmit Power Supply Voltage 9.6V to 32V ‘smoothed’ DC © Satamatics Ltd. Page 17 of 24...
-
Page 18: Interfaces
Items 1,2 & 4 can be purchased as a kit from your equipment supplier or authorised dealer (Satamatics part number: 00925). The SAT-202C-020 and SAT-202E-020-MF interface connector is a 12 way socket that mates with a Deutsch IMC series plug. Deutsch part numbers for the mating connector are: 1. -
Page 19: General Purpose I/O
IMPORTANT: The factory default configuration disables the SAT-202 output OUT. To use this output the user must ensure that it is configured as an open drain output. Failure to do so will cause unexpected results. © Satamatics Ltd. Page 19 of 24... -
Page 20: Interpreting The Indicator
NOTE: The indicator can be disabled (off state) or enabled via script control. The indicator may therefore not come on when power is applied. Contact your authorised dealer for details of any script that may have been programmed into the SAT-202. Page 20 of 24 © Satamatics Ltd. -
Page 21: Appendix – A
SAT-202 Series User Manual MAN-0034 Issue 1 12 APPENDIX – A 12.1 CE Declaration of Conformity © Satamatics Ltd. Page 21 of 24... -
Page 22: Appendix – B
SAT-202 Series User Manual MAN-0034 Issue 1 13 APPENDIX – B 13.1 Inmarsat Type Approval Page 22 of 24 © Satamatics Ltd. -
Page 23: Appendix – C
DATE OF PURCHASE: PURCHASED FROM: SAT-200/202 ISN: SAT-202 SERIAL NUMBER: IMPORTANT: PLEASE KEEP IN A SAFE PLACE FOR FUTURE REFERENCE NOTES: Dealer: © Satamatics Ltd. Page 23 of 24... - Page 24 " # " ! " # " !
Need help?
Do you have a question about the SAT-202C-020 and is the answer not in the manual?
Questions and answers