Summary of Contents for Elan STROBE-400-LEDMINI-RGB
Page 1
STROBE-400-LEDMINI-RGB USER’S MANUAL Thank you for purchasing a product from our STROBE-400-LEDMINI-RGB. Every suit has been thoroughly tested and shipped in perfect condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your unit for any damage and be sure all accessories necessary to operate the unit has arrived intactly.
Page 2
Contents 1. Safety Instructions ..................3 2. Preparation For Use ..................3 3. DMX-512 Control Connection ..............3 4. Specifications ....................4 5. Operation .....................5 6. DMX Control Summary ................6 7. DMX Functions and Values .................6 8. Cleaning And Maintenance .................8 9. Installation ....................9 10.
Never look directly into the light source, as sensitive persons may suffer an epileptic shock. 2. Preparation For Use UNPACKING Thank you for choosing ELAN Lighting Unpack the device, inside the box you should find: • The fixture device •...
The auto-ranging power supply automatically adjusts to AC power from 110-240 volts nominal at 50/60 • The current required by the STROBE-400-LEDMINI-RGB is 4.5 amps. To avoid overload, allow one 4.5 amp branch circuit per fixture to operate the STROBE-400-LEDMINI-RGB model at full power.
5. Operation Display Menu Menu Sub-menu Address Set DMX Address 001-512 Mode 1 Auto Mode 1 Mode 2 Auto Mode 2 Mode 3 Auto Mode 3 Auto Mode 4 Auto Mode 4 Mode 5 Auto Mode 5 Mode6 Auto Mode 6 Speed 000-031 Auto Run Speed...
6. DMX Control Summary Intensity Flash intensity can be set from minimum (blackout) to maximum in all DMX modes except 1 channel mode (where it is always at maximum intensity). A special pixel mode enables the fixture to be used as a blinder, where the intensity of blinder colour can be set.
• There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. • If you need any spare parts, please use genuine parts. • If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only in order to avoid hazards.
Page 10
IMPORTANT INFORMATION! In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the impact on human health and the environment, please make sure that this product is recycled at the end of its life. Note: All information is subject to change without prior notice.
Need help?
Do you have a question about the STROBE-400-LEDMINI-RGB and is the answer not in the manual?
Questions and answers