Table of Contents
Advertisement
Quick Links
Double Swing Set
Assembly & User Instructions -
Important
Age: 3 - 8years
Maximum user
weight: 45kg
Important -
Please read these instructions fully before assembly or use.
These instructions contain important information which will help you get the best from your
product and ensure safe and correct assembly, use and maintenance.
If you need help or have damaged or missing parts, call the
Tips: It will take 2 adults
around 30 minutes to
assemble.
Please keep for future reference
Customer Helpline: (+44) 01702 208117
367/7423
Advertisement
Table of Contents
Summary of Contents for Chad Valley 367/7423
- Page 1 Double Swing Set Assembly & User Instructions - 367/7423 Please keep for future reference Important Tips: It will take 2 adults Age: 3 - 8years around 30 minutes to Maximum user assemble. weight: 45kg Important - Please read these instructions fully before assembly or use.
- Page 2 Contents Warnings Parts Assembly Instructions Care and Maintenance...
-
Page 3: Warnings
Warnings Important –Please read these instructions fully before assembly or use. WARNING ● For safety reasons, this swing MUST be anchored into the ground. Please read this instruction manual before you start to ● Anchors shall be placed level with or under the ground assemble or use this swing set. -
Page 4: Warnings
Safety Information Important –Please read these instructions fully before assembly or use. ● Do not let children use the equipment until it has been fully assembled. ● Remove all assembly tools once fully assembled. ● This product accommodates no more than 2 children. ●... -
Page 5: Parts
Parts If you have damaged or missing parts, call the Customer Helpline: (+44) 01702 208117 Please Check you have all the parts fittings listed below Leg x 4pcs DBLSW-LEG-BTM Beam x 1pcs SW-BEAM Beam x 1pcs SW-BEAMSHORT Seat x 2pcs SW-SEAT2 Leg x 2pcs DBLSW-LEG-RGT... -
Page 6: Assembly Instructions
Assembly Instructions Step 1 Connect Beams (1)and (2) together. No need to secure with screws in this step. Attach Legs (3) and (4) to Beam (1) and (2) as shown in Figure 1.The legs need to be inversed on the two sides of the swing frame. Figure 1 x 2pcs x 4pcs x 2pcs... - Page 7 Assembly Instructions Step 2 Attach swing Seats (7) to Beam (1) and (2) as shown in Figure 2. Figure 2 x 16pcs x 8pcs x 4pcs x 8pcs...
- Page 8 Assembly Instructions Step 3 Insert Legs (6) into Legs(3) and (4) and secure together with Rail (5) as shown in the enlarged diagram. Note: -Plastic cap (9) needs to be inserted into rail (5) before securing the bolt. -Rail (5) needs to be attached to the outer sides of the swing frame.
- Page 9 Assembly Instructions Step 4 Attach anchors (8) to the bottom of legs (6) as shown in Figure 4 Ground 30cm Depth Concrete 30cm Width...
-
Page 10: Assembly Instructions
Assembly Instructions SEAT ADJUSTABLE GUIDE THE LENGTH OF THE ROPE IS ADJUSTABLE FOR THE HEIGHT OF THE CHILD THROUGH THE SEAT CONNECTOR. TO ADJUST, LOOSEN THE KNOT ON THE SEAT CONNECTOR, PULL ROPE THROUGH THE HOLES AND TIGHTEN AGAIN. MAKE SURE THAT THE KNOTS ARE TIGHT AND THAT BOTH ROPES ARE ADJUSTED SO THAT THE SEAT IS HORIZONTAL. -
Page 11: Care And Maintenance
(+44) 01702 208117 Produced for Chad Valley Toys. Argos Ltd. Country of origin: China Address: 489 - 499 Avebury Boulevard, Central Milton Keynes, MK9 2NW. www.argos.co.uk SP-19-SW2R001-ARGOS-16001...
Need help?
Do you have a question about the 367/7423 and is the answer not in the manual?
Questions and answers