CP EBR-MINPIR Product Manual

EBR-MINPIR-DALI
DALI network miniature PIR with photocell
Sensor head
Product Guide
The EBR-MINPIR-DALI presence detector provides
automatic control of lighting. It is connected to the Rapid
DALI Gateway via a DALI network.
Functioning as a presence detector, the unit can turn lights
on when a room is occupied and off when the room is
empty.
An adjustable internal light sensor provides light level
information to the Rapid system to allow lights to be kept
off if sufficient daylight is present, and to enable maintained
illuminance for dimming systems.
An integral IR sensor in the unit allows the unit to be
commissioned, and used in conjunction with a remote
control handset (part no: UHS) to:


This detector is ideal for mounting in chill beams or
continuous run lighting.
PIR Sensor
Detects movement within the unit's detection range,
allowing load control in response to changes in occupancy.
IR Receiver
PIR lens
which covers...
Receives control and programming commands from an
IR (infrared) handset.
IR Receiver
Light Level Sensor
Light Level Sensor
Status LED
Measures the overall light level in the detection area
Status LEDs
The LED flashes Red to indicate the following:
Walk Test LED active
Valid setting received
Act as a conventional dimmer
Override the unit on or off
Overview
Features
when movement is detected