Ram And Application Software Reset Procedure - Olivetti NETTUN@3000 Troubleshooting Manual

RAM AND APPLICATION SOFTWARE RESET PROCEDURE

In the event of an error condition that causes the cash register to crash and the
corrective action described at point 1 of page 2 does not solve the problem, perform
a RAM and application software reset operation to restore the normal operating
conditions.
To activate this procedure:
1. Power off the cash register by pressing the key on the operator panel.
2. Press the ON/OFF switch (located at the rear) turning this to the (O) position.
3. Wait approximately 20 - 30 seconds.
4. Press the ON/OFF switch (located at the rear) turning this to the (I) position.
press and hold down the
5. Power on the cash register, key at the same
time as the key .
6. When the touch screen shown the figure below, release the keys.
3000
9