Page 4
Technical data Application Electrical data boiling water storage heater: The GROHE Red boiling water fitting supplies boiling water in • Connection: Wall socket with earth wire, protected addition to hot and cold tap water. Boiling and mixed water via a 13 A fuse flows into the GROHE Red fitting through separate pipes and •...
Page 5
3. Screw storage heater pressure hose (I) marked blue to expansion vessel (C) using the seals provided. The GROHE Red boiling water system is now fully 4. Connect copper pipe (not in the scope of delivery) to installed and ready for operation.
Page 6
See technical product information of filter cartridge for information on replacing the filter cartridge. The GROHE Red boiling water storage heater cannot be repaired. If servicing is required, the complete storage heater Resetting the filter capacity at the display unit (F), see fold- must be replaced.
Page 7
Water not boiling • Hose connection or internal tank leaking - Switch off the storage heater, disconnect the mains Storage valve losing plug and contact GROHE Customer Service water • Fitting flow straightener dirty or defective - Replace flow straightener, see section...
Need help?
Do you have a question about the Red Duo 30 058 and is the answer not in the manual?
Questions and answers