Ethernet Communication - Abatron BDI2000 User Manual

GDB
bdi
for BDI2000 (PA6T)

2.4.2 Ethernet communication

The BDI2000 has a built-in 10 BASE-T Ethernet interface (see figure below). Connect an UTP (Un-
shilded Twisted Pair) cable to the BD2000. For thin Ethernet coaxial networks you can connect a
commercially available media converter (BNC-->10 BASE-T) between your network and the
BDI2000. Contact your network administrator if you have questions about the network.
10 BASE-T
Connector
1 - TD+
2 - TD-
3 - RD+
4 - NC
5 - NC
6 - RD-
7 - NC
8 - NC
The following explains the meanings of the built-in LED lights:
LED Name
LI Link
TX Transmit
RX Receive
© Copyright 1997-2008 by ABATRON AG Switzerland
RS232 POWER
PC / Unix
Host
Description
When this LED light is ON, data link is successful between the UTP
port of the BDI2000 and the hub to which it is connected.
When this LED light BLINKS, data is being transmitted through the UTP
port of the BDI2000
When this LED light BLINKS, data is being received through the UTP
port of the BDI2000
1 8
LI TX RX 10 BASE-T
Ethernet (10 BASE-T)
User Manual 11
Target System
PA6T
BDI
2000
V 1.00