PAC RP5-GM11 Manual

RP5-GM11
Introduction & Features
The RP5-GM11 interface allows the replacement of a factory radio in select General Motors vehicles with Class II radios.
Using this interface will retain factory features such as OnStar, steering wheel controls (SWC), warning chimes, Rear
Seat Controls (RSC), Rear Seat Entertainment (RSE) and the BOSE amplifier when the original radio is removed. The
RP5-GM11 also provides data bus driven outputs such as retained accessory power (RAP), vehicle speed sensor (VSS),
illumination, reverse trigger and parking brake.
Important Notes
1. The radio select rotary switch on the side of the interface must be adjusted to the proper radio setting before plugging the
interface into the vehicle (see next page for setting chart).
2. The interface comes pre-programmed for all of the vehicles factory SWC functions and does not require programming unless
you wish to re-assign the SWC functions to different buttons. The SWC can always be restored to default settings by pressing
and releasing the program button on the side of the interface once and waiting 7 seconds for the LED to flash 3 times. PLEASE
NOTE: Due to the many different possible OEM SWC configurations, some applications may need to be reprogrammed
for the SWC assignments to make sense. Whatever you assign as aftermarket volume commands will also be the
OnStar volume commands.
3. The aftermarket radio must have an auxiliary input in order for the factory RSE audio to be retained through the cabin speakers.
4. RSC buttons that are identical to the SWC will mimic the SWC one for one.
5. The LED will flash whenever a SWC button is pressed.
Wiring Connection Chart
Aftermarket Radio Connections
Yellow
Black
Red Acc. Output
White Front Left + input
White / Black Front Left - input
Grey Front Right + input
Grey / Black Front Right - input
Green Rear Left + input
Green / Black Rear Left - input
Purple Rear Right + input
Purple / Black Rear Right - input
Illustration / Schematic
Vehicle
Connections
Pacific Accessory Corporation
+12v Light Green
Ground Pink
Blue
Blue / White
Orange / White
Purple / White
Brown Loop
Wiring
Pacific Accessory Corporation
© 2017 AAMP Global. All rights reserved. PAC is a Power Brand of AAMP Global.
Radio Replacement & Steering Wheel Control Interface
with OnStar Retention for General Motors Vehicles
Parking Brake Output (-)
Vehicle Speed Output
Not Used
Amp Turn On Input
Illumination Output (+)
Reverse Output (+)
Mute Loop - See
installation note 6.
Aftermarket
Radio
Connections
PAC-audio.com
SWC Connector
Blue/Yellow Kenwood, Newer JVC
Alpine, JVC, Clarion,
Pioneer, Sony, Fusion,
3.5mm Jack
Boyo, Dual, Lightning Audio,
Visteon or Advent
x3
SWC Connection
SWC Connection
See above chart for
different radio type
connections
Rev. 092117 Page 1