Snmp-Server Enable Traps Link - Cisco nexus 3000 series Command Reference Manual

snmp-server enable traps link

S e n d c o m m e n t s t o n e x u s 3 k - d o c f e e d b a c k @ c i s c o . c o m
snmp-server enable traps link
To enable the Simple Network Management Protocol (SNMP) notifications on link traps, use the
snmp-server enable traps link command. To disable SNMP notifications on link traps, use the no form
of this command.
Syntax Description
notification-type
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.0(3)U1(1)
Cisco Nexus 3000 Series NX-OS System Management Command Reference
-SM-306
snmp-server enable traps link [notification-type]
no snmp-server enable traps link [notification-type]
(Optional) Type of notification to enable. If no type is specified, all
notifications available on your device are sent. The notification type can be
one of the following keywords:
•
•
•
•
•
•
•
•
•
•
•
•
Modification
This command was introduced.
IETF-extended-linkDown—Enables the Internet Engineering Task
Force (IETF) extended link state down notification.
IETF-extended-linkUp—Enables the IETF extended link state up
notification.
cisco-extended-linkDown—Enables the Cisco extended link state
down notification.
cisco-extended-linkUp—Enables the Cisco extended link state up
notification.
connUnitPortStatusChange—Enables the overall status of the
connectivity unit Notification.
delayed-link-state-change—Enables the delayed link state change.
fcTrunkIfDownNotify—Enables the Fibre Channel Fabric Element
(FCFE) link state down notification.
fcTrunkIfUpNotify—Enables the FCFE link state up notification.
fcot-inserted—Specifies that the Fibre Channel optical transmitter
(FCOT) hardware has been inserted.
fcot-removed—Specifies that the FCOT has been removed.
linkDown—Enables the IETF Link state down notification.
linkUp—Enables the IETF Link state up notification.
Chapter System Management Commands
OL-29557-04