PAC SWI-CP2 Manual

Steering Wheel Control Interface
Introduction & Features
The SWI-CP2 interface allows the retention of steering wheel controls (SWC), rear seat controls (RSC) and retained
accessory power (RAP) whenever replacing a factory radio. Use of this interface also allows you to program two radio
functions to each SWC button by using short press/long press dual command functionality. The SWI-CP2 works in
vehicles with either data or analog SWC.

Features

• Compatible in vehicles equipped with LAN, LIN, CAN, Class II, Analog or Serial Data SWC
•
• Retains memory even if power is lost
• Ability to assign two radio functions to one SWC button
• Updatable via the ControlPro PC Application.
•
• Highly visible tricolor LED to keep the user informed of the modules status.
• Equipped with a manual learning function for compatibility with unlisted vehicles equipped with analog steering wheel controls.
Interface & Wiring Overview
Red (+) Accessory 12v Input
Black (-) Analog SWC Ground
Black (-) Chassis Ground
Red/White (+) Accessory 12v Output
White (-) Analog SWC Input 1
Yellow (+) Constant 12v Input
Purple Data 2 Input
Pink Data 1 Input
Light Green (+) 12v Analog SWC Input
White/Red (-) Analog SWC Input 3
White/Black (-) Analog SWC Input 2
Blue/Yellow SWC Output - Kenwood/Newer JVC
3.5mm Jack
P ifi A C ti
TM

Programming

Button Status LED
(LIN, IBUS, CLASSII, SERIAL)
(LAN, MSCAN, SWCAN, LSFT)
SWC Output - Alpine, JVC, Clarion,
Pioneer, Sony, Boyo, Dual, Advent,
Lightning Audio or Visteon
Copyright © 2017. All rights reserved. PAC is a Power Brand of AAMP Global.
Universal Steering Wheel Control Retention Interface
Vehicle
Dipswitches Dipswitches
PAC-audio.com
Radio
USB Port
Rev. 051617
SWI-CP2
Page 1