Don't fly in the rain! Water or moisture may enter the transmitter through the antenna or stick openings and
cause erratic operation or loss of control. If you must fly in wet weather during a contest, be sure to cover your
transmitter with a plastic bag or waterproof barrier. Never fly if lightning is expected.
The MicroSD card (TF Card) (not provided with Taranis Q X7) can store various files, such as model data, music, sound files,
pictures and text. The card is locked when it is pushed in all the way in. To remove the card, push in on the card again, it
will pop out allowing you to remove it.
△ ! Warning
Be sure to turn off the power of the transmitter before inserting or removing a MicroSD card.
As the MicroSD card is a precision device, do not use excessive force when inserting.
If model data generated by a transmitter with a new software version is copied to an one with older software, the
transmitter may not operate correctly. Before copying the model data, update the destination transmitter to the
new software version.
Do not expose the MicroSD card to dirt, moisture, water or fluids of any kind.
Never remove the MicroSD card or turn off power while entering data.
Never store the MicroSD card where it may be subject to strong static electricity or magnetic fields.
Do not expose the MicroSD card to direct sunlight, excessive humidity or corrosive environments.
Be certain to insert the MicroSD card in the correct direction.
Read data from a PC
Music and image files edited by a PC can be transferred onto the MicroSD card and used on your TARANIS Q X7
transmitter. Equipment for reading and writing MicroSD cards is available at most electronics stores.
Stored data
The life of the MicroSD card is limited due to the use of Flash memory. If you have a problem saving or reading data such
as picture data after a long period of use you may need to purchase a new MicroSD card.
We are not responsible for, and cannot compensate for any failure to the data stored in the memory card for any
reason. Be sure to keep a backup of your models and data in your MicroSD card.
TARANIS Q X7 transmitters and MicroSD cards use non-volatile memory devices so that the data stored is
retained, even without a backup battery. Nevertheless, it is good practice to back up the data in the transmitter to the
MicroSD card. The clock for the transmitter does depends on the lithium battery, which may need to be replaced
occasionally.
Updates
FrSky is continuously adding features and improvements to our radio systems. Updating (via the MicroSD card in Taranis
Q X7) is easy and free. To get the most from your new transmitter, please check the download section of the FrSky
website www.frsky-rc.com, for the latest update firmware and how-to guide.
﹡The currently pre-installed firmware of FrSky Taranis Q X7 is modified from OpenTX firmware, improved and well tested
by FrSky and the developing union.
﹡More information about OpenTX can be found on: http://openrcforums.com.
Website:
Secure Digital (SD) Memory Card Handling Instructions
www.frsky-rc.com
E-mail:
FrSky Electronic Co., Ltd.
frsky@frsky-rc.com
Technical Support:
www.frsky-rc.com
sales4tech@gmail.com
Need help?
Do you have a question about the TARANIS Q X7 and is the answer not in the manual?
Questions and answers