Sanyo NVM-4030 User Instructions For Operating page 9

SANYO
Figure 2: Top and Bottom view
Table 3: Top and Bottom controls
No. Function
1 Power button Normal On/Off power button.
2 USB input Connects to the USB cable.
3 On/Off The main power/battery cutoff switch.
4 Reset Restarts your device with (a soft reset).
NVM-4030 Portable Navigation Device
1
2
3 4
Contents
Figure 3: Left and Right side view
5
1
2
Table 4: Left and Right panel controls
No. Function
1 Headphone Standard stereo headphone jack.
DC Power
For Adapter or car charger
2
input
3 FM antenna For FM reception
Accepts a SD (Secure Digital) or MMC (MultiMediaCard)
4 SD/MMS slot
card for data storage.
This connector (under rubber dust cover) allows use of an
5 GPS antenn
optional external GPS antenna.
9
Index
4
3
Chapter 2 Getting Started