Advertisement
Connecting the HDMI cable
Power
HDMI
MENU DVI
Need more help? Go to the following resources.
http://wiki.openhourlab.com
http://forum.openhourlab.com
http://support.cloudmedia.com
Remote Learning Zone
2001 - 2014 © Cloud Media .All Rights Reserved.
You are able to map your TV remote or
any device button to the Remote control.
Just follow the simple steps below.
1. Press and hold the RED key in the TV
learning zone for 5 seconds until the LED
light stops blinking and turns solid.
2. Press any key within the learning zone
that you would like to map.
3. When the LED light is blinking, point the
TV remote directly at the IR window lo-
cated on top of the remote, and press the
TV remote key you would like to map.
4. Once the key is mapped, the LED will
stop blinking.
5. Press the OK button on the Chameleon
remote to confirm.
6. Repeat the process above to map the
other keys. You can map up to a total of 5
keys in the learning zone.
Advertisement
Need help?
Do you have a question about the Chameleon and is the answer not in the manual?
Questions and answers
Please can I on my device without the remote ?
Yes, you can operate the Open Hour Chameleon without the remote. You can use an air mouse or a wireless keyboard/touchpad like the Logitech K400. However, by default, the launcher and notifications do not show, so you may need to enable the system bar in the settings to access notifications and status bars.
This answer is automatically generated