Electrical Connection - Miele M 6012 SC Operating Instructions Manual


Before connecting the appliance,
ensure that it has not been damaged
in any way.
Do not use a damaged appliance.
The microwave must be connected to a
suitably earthed socked (220-240 V, 50
Hz).
The connection must comply with
national and local safety regulations.
Ensure that the plug and switched
socket are accessible at all times.
When switched off there must be an all-
pole contact gap of 3 mm in the isolator
switch (including switch, circuit
breakers and relays).
The connection data can be found on
the data plate located on the front of
the oven interior or on the back of the
appliance. Please ensure these match
the household electricity supply.
If the connection cable is damaged, it
must be replaced by a Miele authorised
service technician in order to avoid a
hazard.
The appliance must not be connected
to the inverter of an autonomous power
supply such as e.g. a solar power
system. When the appliance is
switched on, power surges could result
in a safety switch-off. This can damage
the electronic unit.
The appliance must not be used with
so-called energy saving devices
either. These reduce the amount of
energy supplied to the appliance,
causing it to overheat.

Electrical connection

67