Table of Contents
Advertisement
User's Manual
Product Requirements
•
In-wall installation with hardwired connections.
•
Neutral wire required.
•
Single-pole light switch. The electrical box should be more than 2 inches
deep.
•
A smartphone or tablet running iOS 9 or higher; Android 4.1x or higher.
•
A Wi-Fi connection (supports 802.11b/g/n standard).
Smart Wi-Fi Light Switch Installation
Important Safety Information
Before installing, servicing, or removing the Smart Switch, read and follow all
safety precautions, including the following:
•
WARNING: RISK OF ELECTRIC SHOCK OR FIRE. Turn OFF power supply at
the circuit breaker or fuse. Use a noncontact voltage tester to ensure the
power is off.
•
CAUTION: RISK OF ELECTRIC SHOCK. More than one disconnect switch
may be required to de-energize the equipment before servicing.
•
Install only in a suitable UL Listed outlet box.
•
The Smart Switch must be installed and used in accordance with the
National Electric Code (NEC) or your local electrical code. If you are
unfamiliar with these codes and requirements, or are uncomfortable
performing the installation, consult a qualified electrician.
•
The Smart Switch is an indoor single-pole switch that requires a neutral
connection.
•
Do not install the Smart Switch with wet hands or when standing on wet or
damp surfaces.
Load Information
100~120V ac, 15A max, Res
100~120V ac, 5A, Tungsten
100~120V ac, 5A, Electronic Fluorescent Ballast
www.tp-link.com
Smart Wi-Fi Light Switch
5
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HS200 and is the answer not in the manual?
Questions and answers