Table of Contents
Advertisement
6.2 Reset/Restore the Gateway via the RESET button in Rear
Panel
To reset the Gateway to factory defaults, you should press and hole the RESET button on the rear
panel of Gateway for more five or seconds. You can also need to do this if a misconfigurations ha
locaked out all access.
1 Make sure that the Gateway is turned on.
2 If you want to:
Reset the Gateway, use a pen or an unfolded paperclip to push the recessed Reset button on the
back panel of the Gateway for approximately 5 seconds and then release it.
Restore the factory default settings of the Gateway, use a pen or an unfolded paperclip to push the
recessed Reset button on the back panel of the Gateway for at least 15 seconds and then release it.
3 The Gateway can restart.
Hide quick links:
Advertisement
Table of Contents
