Contents Introduction Your airpanel V150 Wireless Monitor ........2 Precautions ................2 airpanel V150 Features ............3 Front Control Buttons and Features ........3 Rear Connection Ports & Panels ........4 Battery & Power Properties ............ 5 Battery Power Status ............5 Changing the Battery ............
Page 4
External USB Keyboard ............25 External USB Mouse ............25 External Headphone Set ............. 25 External Microphone ............25 Appendix airpanel V150 Specifications ..........26 Customer Support ..............28 Cleaning and Maintenance ............ 29 Limited Warranty ..............30 Safety Guidelines ..............31 Compliance and Safety Notices ..........
Microsoft Windows XP Professional PC remotely. This user guide will help you set-up your airpanel V150 and introduce you to its many features. Important! Save the original box and all packing material for future shipping needs.
Stylus in Storage Slot Stylus Tether Port USB Ports (Two) Reset Port PCMCIA Eject Button 10. PCMCIA Card Slot 11. USB Port (Mini-B) 12. Kensington Security Lock Port 13. Docking Port 14. Auxiliary Battery Port 15. Main Battery Latch ViewSonic air panel V150...
CAUTION: Replace only with airpanel V150 battery (MW-BAT-003). Your airpanel V150 has two power sources, AC (using the AC/DC converter) or battery. To run your airpanel V150 from an AC outlet, use the supplied AC/DC adapter cable. It takes the airpanel V150 approximately two (2) hours to charge while not in use and four (4) hours while in use.
Figure 3: Battery Removal and Insertion Antenna Signal Properties Your airpanel V150 and home PC use a wireless radio signal standard called Wi-Fi (802.11b) to communicate with one another. For the best possible connection signal, locate the AirSync wireless adapter at an adequate height above floor level.
Charging the Battery Using the AC/DC Power Converter Before using the airpanel V150 Wireless Monitor for the first time, charge the battery for at least 3 hours. You may charge, recharge, and/or operate your airpanel V150 with available AC power using the AC/DC power converter.
Setting Up Software The airpanel V150 Wireless Monitor is intended for use as a Microsoft Windows for Smart Display device. The Smart Display capability allows the airpanel remote access to a home computer running the Windows XP Professional operating system.
Page 13
STEP 2 Turn on the your Home PC STEP 3 Insert the airpanel V150 Utility CD ® The airpanel utility contains the Microsoft Windows for Smart Displays installation software. If the Setup application does not start up automatically, you can start it manually by opening Setup.exe on the CD.
Page 14
Action Item 4: STEP 5 Connect the USB Setup Cable When prompted, connect the airpanel V150 and host PC to one another using the USB Setup Cable (USB Mini-B to Type A) to down load OS to V150 ViewSonic air panel V150...
Page 15
STEP 6 Remove the USB Setup Cable When the setup application is finished,disconnect the host PC and the airpanel V150 from one another by removing the USB Setup Cable The quality of your radio connection signal can be weakened by excessive distance and by intervening materials such as walls and furnishings.
Accessing Information from your Home PC You are now ready to use the airpanel V150 Wireless Monitor to access information from your home computer. Opening the air panel Link to your Home PC To establish initial access to your Home PC, you begin at the airpanel default Welcome screen.
Using the air panel V150 The Buttons The buttons on the right and left side of the airpanel V150 Wireless Monitor screen give you quick access to utilities and provide navigational control. FRONT BUTTONS Power C. Virtual Keyboard D. Connection E.
When not in use, you can conveniently place your stylus in the storage slot located on the top edge of your airpanel V150 Wireless Monitor. A Stylus Tether has been provided to allow you to attach the stylus to the airpanel so it will not become lost or misplaced.
The double-tap rate can be set in the Settings window: Tap on the desktop Settings button - the Settings window will open Tap on the General Tab Double-tap on the checkerboard graphic to set your double tap rate Close the Settings window ViewSonic air panel V150...
Hard Reset A hard reset may be required on rare occasions if your airpanel V150 completely locks up and the soft reset described above does not help. You can perform a hard reset by detaching the main battery while the device is On.
PCMCIA Cards A PCMCIA card can extend the functionality of your airpanel V150 Wireless Monitor by providing added features such as extra storage. Using a PCMCIA Card Insert PCMCIA card carefully into the slot on the top side of the airpanel until it snaps into place.
Need help?
Do you have a question about the airpanel V150 and is the answer not in the manual?
Questions and answers