6. Start the programme - the end of a programme
Starting the programme
Touch the flashing Start/Stop sensor.
The door will lock (the symbol will
appear in the display to show this) and
the programme will start.
The programme status will appear in
the display.
Cottons
Temperature
Spin speed
1
Main wash
Change
The washing machine lets you know
which section of the programme has
been reached and the programme
duration remaining . If a delay start
time has been selected, then this will
appear in the display.
The drum lighting switches off once the
programme has started.
At the end of a programme
The door is still locked during the anti-
crease phase and the following will ap-
pear alternately in the display:
and
crease
Finished
The following information will also ap-
pear:
Press the Stop button, then unload
the drum.
Touch the Start/Stop sensor. This will
unlock the door.
The door unlocks automatically at the
end of the anti-crease phase.
10:30
60 °C
1600
rpm
h
1:45
2
Save
Anti-
.
Pull open the door.
Remove the laundry.
Items left in the drum could discolour
other items in the next wash or be-
come discoloured themselves.
Check that all items have been re-
moved from the drum.
Check the folds in the door seal for
any small articles, e.g. buttons, which
might be lodged there.
Tip: Leave the door slightly open to al-
low the drum to dry.
Switch the washing machine off with
the button.
If applicable, remove the used cap-
sule from the detergent dispensing
drawer.
Tip: Leave the detergent dispenser
drawer slightly open to allow it to dry.
37