3.3. Installation work of wireless unit
Refer to "1.2 Appearance/Dimensions" for the size of the wireless unit and the mounter.
1.
Wall mounting
(1) Attach the M6 screws (x4) to the rear of this product. (Recommended tightening torque: 3.0N・m ± 0.4 N・m)
(2) Fix the mounter after making sure that the installation place has an enough strength and flat surface of concrete,
metal, wood, mortar, etc.
Fasten screws (x2) temporarily on the installation surface.
Make sure that the mounter can be installed in parallel, and then fix it firmly with 4 screws located at the upper
and the lower sides.
(Recommended tightening torque: 3.0 N・m ± 0.4 N・m)
M6 screw (x4)
48