JDS Uniphase VSE-1100 Quick Start Manual

VSE-1100
Quick Start Guide
JDSU Sales
North America Tel:
1 855 ASK JDSU (1 855 275 5378)
Latin America Tel:
+1 954 688 5660
Tel:
+852 2892 0990
EMEA Tel:
+49 7121 86 2222
Tel:
JDSU
Technical Assistance Center
855 275 5378 / 855 ASK JDSU
Option 3-1-2
email: catvsupport@jdsu.com
VSE-1100 Warnings
WARNING
!
If the equipment is used in a manner not specified
by the manufacturer, the protection provided by the
equipment may be impaired.
WARNING
!
Do not disassemble the meter.
Do not attempt to service this product yourself.
There are no user-serviceable parts inside.
Contact the appropriate JDSU representative for
repair or calibration.
WARNING
!
Do not use this product in the vicinity of a gas leak
or in any other explosive environment.
WARNING ELECTRICAL SHOCK
Electrical shock may result in serious injury or death.
Be sure the AC cord is connected to the correct
voltage mains. Use only the universal power supply
with the test set.
22048437-001 Rev003
What is in the box?
Fax:
+1 954 345 4668
Fax:
+852 2892 0770
Fax:
+49 7172 86 1222
VSE-1100
Case
12V DC AC Power Cable
Power Cable and Adapter
VSE-1100 Basics
Signal/PowerConnectors
The VSE-1100 is equipped with dual F-connectors for
differential signal analysis and a power input on the left
side. 12VDC power can be supplied to the unit from the
included AC power adapter or 12VDC power cable.
Left side
Input-Upstream Input-Upstream/
85MHz Only Downstream
Right side
Ethernet Port USB Conn. 2 Tablet
Connection
On the right side are the control connectors - a USB
connector for direct atachment to the tablet and an
Ethernet port connector.
WiFi Antenna
A standard WiFI antenna is located on the rear of the unit
and can be repositioned for maximum reception by
rotating as needed.
Power
Micro-USB