Power Acoustik PTID-3600 Owner's Manual

Power Acoustik PTID-3600 Owner's Manual

In-dash 3.6” monitor touch sensor dvd/cd/mp3/mp4 mw/fm radio built-in tv tuner

Advertisement

Quick Links

PTID-3600/ PTID-3600T
In-Dash 3.6" Monitor
Touch Sensor
DVD/CD/MP3/MP4
MW/FM Radio
Built-in TV tuner
Owner's Manual
Take the time to read through this owner's manual.
Familiarity with installation and operation procedures will help you obtain the best
Performance from your new DVD-receiver.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTID-3600 and is the answer not in the manual?

Questions and answers

Summary of Contents for Power Acoustik PTID-3600

  • Page 1 PTID-3600/ PTID-3600T In-Dash 3.6” Monitor Touch Sensor DVD/CD/MP3/MP4 MW/FM Radio Built-in TV tuner Owner’s Manual Take the time to read through this owner’s manual. Familiarity with installation and operation procedures will help you obtain the best Performance from your new DVD-receiver.
  • Page 2: Table Of Contents

    Table of Contents Table of Contents...1 Important Safeguards...2 Accessories ...3 Installation/Un-Installation ...4 Wiring Connections...5 Detachable Control Panel ...6 Panel Controls……………...7 IR Remote Controls ...8 General Operations...9 Digital Tuner...12 Memory Card/ USB Operations... 12 Disc operations..15 MP3 overview..18 TV OPERATIONS..19 Compatible Files ...
  • Page 3: Important Safeguards

    Important Safeguards ℃ Using the device at temperature below -10 may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! Read carefully through this manual to familiarize yourself with this high-quality sound system. Disconnect the vehicle's negative battery terminal while mounting and connecting the unit.
  • Page 4: Accessories

    Accessories Package contains the following accessories for installation and operation of the unit. (1) Washer, Spring 1 each Washer, M5 Nut (2) Mounting Strap (3) Screw (4) Bolt (5) Mounting Collar (6) Release Key (7) Rubber Cushion AV in Cable Owner’s Manual Panel Carrying Case Remote Controller...
  • Page 5: Installation/Un-Installation

    Installation/Un-Installation First complete the electrical connections, and then check them for correctness. Installation This unit can be installed in any dashboard having an opening as shown on the picture. The dashboard should be 4.75 – 5.56 mm thick in order to be able to support the unit. 1.
  • Page 6: Wiring Connections

    Wiring Connections Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection.
  • Page 7: Detachable Control Panel

    Detachable Control Panel Detaching the control panel Turn the Power off. Press OPEN button release the panel. Pull the panel out. Attaching the control panel Insert the left side of the control panel into the main unit. Press the control panel right side until the “click” sound is heard. Caution: DO NOT insert the control panel from the right side.
  • Page 8: Panel Controls

    Panel Controls Front panel 1. AUX IN 2. POWER/ MUTE 6. VOL + 7. PLAY/PAUSE 11. MODE 12. PREVIOUS 16. BAND 18. Memory Card slot 19. EJECT button 20. Disc slot 3. IR sensor 4. AS/PS 8. MENU 9. TFT display 13.
  • Page 9: Ir Remote Controls

    IR Remote Control REPLACING THE BATTERY Remote Control comes with a CR-2025 Lithium Battery included. 1. Remove the Battery Holder from the back of the Remote Control. 2. Insert a CR-2025 Lithium battery with the positive (+) mark upward. Insert the Battery Holder into the back of the Remote Control.
  • Page 10: General Operations

    Do not re-charge, short, disassemble or heat the battery or dispose it in fire. Do not expose or bring into contact the battery with other metallic materials. Doing this may cause the battery to give off heat, crack or start a fire. When throwing away or saving the battery, wrap it in tape and insulate;...
  • Page 11 Audio Setting Press SEL button on the Remote Control to select the audio setting (or on front panel, long press SEL button in radio mode, short press SEL button in other mode to select the audio setting) BASS =>TREBLE => BALANCE => FADER => EQ. Press buttons on remote to select the audio setting item (or press the VOL knob on front panel to select the setting item).
  • Page 12 PICTURE MENU MENU DESCRIPTION Adjust level of red color. Support 50 levels. Default level is 25. GREEN Adjust level of green color. Support 50 levels. Default level is 25 BLUE Adjust level of blue color. Support 50 levels. Default level is 25. BRIGHTNESS Adjust level of screen brightness.
  • Page 13: Digital Tuner

    Digital Tuner Note: Memory Card /USB service availability varies with areas. Please understand if Memory Card /USB service is not available in your area, the following service is not available, either. Band selection Press MODE button to select the RADIO mode. Press the BAND button to select the desired band: FM1=>...
  • Page 14: Fast Forward And Backward

    Memory CARD To play MP3/ MP4/ WMA files on a Memory CARD, insert the card into the card slot (you should press the OPEN button on the panel to flip down front panel and insert the card into card slot.) The unit will start playing MP3/ MP4/ WMA files on the Memory card memory automatically.
  • Page 15 Random Press the RDM button on remote to play all song tracks in random order. Press and hold for two seconds to play all album tracks in random order. Press again to cancel. Note: This function is only for audio files. Intro Playback Press the INT button on remote to play the beginning of every track for 10 seconds in sequence.
  • Page 16: Disc Operations

    Discs operations Glossary PBC (Play Back Control) Play Back Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image.
  • Page 17: Loading A Disc

    Loading a disc 1. Turn the power on. 2. Press the Open button on the front panel to flip it down. 3. Insert the disc with the printed side facing upward into the slot. The panel will be closed automatically. The DVD mode will be turned on automatically. The monitor will show the disc content.
  • Page 18 Repeat A-B function 1. During playback, press A-B button on the remote control at the starting point of the section you want to repeat (point A). 2. Press A-B button again at the ending point of the section you want to repeat (point B). Section A-B repeating starts.
  • Page 19: Mp3 Overview

    Changing the subtitle language (for DVD only) Press SUBTITLE button on the RC to select the preferred language for the disc menu. When the selected language is recorded on the disc then this language will automatically be selected. If not, the first language recorded on the disc is displayed.
  • Page 20: Tv Operations

    You should not write non-MP3 files or unneeded folders along with MP3 files on the disc otherwise it takes a long time until the unit starts to play MP3 files. With some CD-R or CD-RW media, data may not be properly written depending on its manufacturing quality.
  • Page 21: Compatible Files

    Compatible Files 1. Audio files: MP3, WMA 2. Video files: MPEG4 TM1 3.11, 4X, 5X and 6X versions Nero Digital TM2 Real time MPEG2 MP@ML display Real time MPEG1 D1 (720X480X30/ 720X576X25) decoding Setup Menu • Press SETUP button to enter the system settings main menu; •...
  • Page 22 Commonly used rating codes: Code Description None Kid safe General Audiences - All ages admitted PARENTAL GUIDANCE SUGGESTED - Some material may not be suitable for children PG-13 PARENTS STRONGLY CAUTIONED - Some material may be inappropriate for children under 13 PG-R Restricted, under 17 requires accompanying parent or adult guardian.
  • Page 23: Other Functions

    Video Setup: Brightness With this menu item you can set up the brightness of the image. Contrast With this menu item you can set up the contrast of the image. With this menu item you can set up the hue. Saturation With this menu item you can set up the color saturation.
  • Page 24: Note On Discs

    Note on Discs Only use groundless loudspeakers. Use only loudspeakers of minimal 40Watt, using fewer watts may result in damaging your loud speakers at higher volumes. Use 4~8 Ω (Ohm impedance) loudspeakers only; using higher or lesser impedance may damage the unit. Do not use 3-cable loudspeakers and do not connect the loudspeakers minus to the car body.
  • Page 25: Troubleshooting Guide

    Troubleshooting Guide Symptom Cause General The car ignition is not on. No power The fuse is blown. Disc Presence of disc inside the Disc cannot be player loaded. Inserting the disc in upside down. Disc cannot be Compact disc is extremely read.
  • Page 26: Specification

    Specification General Power supply: 12 V DC Current consumption: Max. 10 A Maximum power output: 40W x 4 channels Compatible formats: DVD/SVCD/VCD/HDCD/MP3/MP4/WMA/CDDA/Picture-CD/JPEG/ CD-R/ -RW/DVD±R/±RW playback Dimensions (W x D x H) 178 x 175 x 50 mm / 1.8 kg / weight: ESP function: 40 sec.

This manual is also suitable for:

Ptid-3600t

Table of Contents