Configuring Ekahau Rtls Controller Settings - Ekahau B4 User Manual

Chapter 2. Initial Activation of the Tag 6
3 which you can run from Ekahau Programs menu. After that, follow the following Activator config-
uration procedure.

2.3.1 Configuring Ekahau RTLS Controller Settings

Input the IP address of the Ekahau RTLS Controller.
Figure 2.1. Specifying the Engine IP address and Maintenance interval
In case Engine Port, Maintenance port, and/or Maintenance IP needs to be changed, go to
"Advanced" mode. The (Periodic) Location Update Interval is set to 60 seconds and the (Periodic)
Maintenance Interval is set to 240 seconds by default , but shorter interval can be used if, for
instance, messages are sent frequently to the B4 tag.