Related Manuals for Honeywell 6108
Summary of Contents for Honeywell 6108
- Page 1 Models 6108 & 6110 DIGITAL STEEL SECURITY BOX Read this manual carefully and never store it inside the box!
-
Page 2: Package Contents
Models 6108 & 6110 Digital Steel Security Box PACKAGE CONTENTS 1 – Digital Steel Security Box 1 – Operation Manual 2 – Emergency Override Keys 4 – “AA” Batteries ATTENTION DO NOT RETURN SAFE TO STORE! For missing parts or difficulty operating your safe, please contact our Consumer Assistance Department by telephone. -
Page 3: Setup And Operation
SETUP & OPERATION STEP 1: OPEN SECURITY BOX & INSTALL BATTERIES For your convenience, we have included 4 “AA” Batteries that provide the power for the electronic keypad. These must be installed before using your box. If your safe is locked, you may use the Emergency Key to open it. - Page 4 SETUP & OPERATION STEP 2: OPEN THE BOX AND RESET PASSCODE The preset factory user code is 3 Ø . 1. Enter the factory preset code and you will see the LED light turn green. 2. Turn the Open/Close knob turn to the left (counterclockwise) and open the lid.
- Page 5 ORDERING NEW / REPLACEMENT KEYS The following information is required to order keys: 1. PROOF OF OWNERSHIP (1 of 2 Options Below) SALES RECEIPT & IDENTIFICATION – INTERNATIONAL ORDERS ONLY! • Copy of sales receipt showing Store, Date & Product Description.
- Page 6 MODEL 6110 - ATTACHING SECURITY CABLE 1. Remove plug from hole on the outer left side of the box. 1. 2. Wrap cable around object and back through looped end. 3. Depress cable release button and hold down. 4. Insert security cable into the hole and release button.
- Page 7 LIMITED WARRANTY LH Licensed Products, Inc., (“LHLP, Inc.”) warrants that for a period of one (1) year from the date of purchase, this product will be free from structural or mechanical defects resulting from materials or workmanship. LHLP, Inc., at its sole option and as the purchaser’s sole remedy under this warranty, will repair or replace this product or any component of the product found to be defective during the warranty period.
-
Page 8: Consumer Assistance
Manufactured by LH Licensed Products, Inc. 860 East Sandhill Avenue Carson, CA 90746 The Honeywell Trademark is used under license from Honeywell International Inc. Honeywell International Inc. makes no representations or warranties with respect to this product. REV. 11-01-2013...
Need help?
Do you have a question about the 6108 and is the answer not in the manual?
Questions and answers
I opened the safe to look inside without turning the emergency key first. I just turned the dial and opened it. Now the security key won't turn counterclockwise as the instructions say.
If the security key on the Honeywell safe model 6108 won't turn counterclockwise after opening the safe without using the emergency key, follow these steps:
1. Ensure the safe lid is fully closed.
2. Check that the Open/Close Knob is in the correct locked position.
3. If the key still does not turn, verify that there is no obstruction inside the locking mechanism.
4. If the problem persists, try gently turning the key while applying slight pressure to the lid.
5. If the issue is still unresolved, use the emergency override key to open the safe and inspect the lock.
6. If necessary, contact the Consumer Assistance Department for further support.
This answer is automatically generated