Setting The Instrument; Configuration Menu; Profile - TESTO 635 Instruction Manual

42

6. Setting the instrument

6. Setting the instrument
This chapter describes the steps that are required in order to adapt the
measuring instrument for specific measuring tasks.

6.1 Configuration menu

The basic settings for the measuring instrument are performed in the
configuration menu.
Opening t t he c c onfiguration m m enu:
The instrument is in measurement view.
Press and hold
Press
ESC
press
ESC

6.1.1 Profile

The instrument has predefined measurement profiles that are tailored to
specific areas of application.
The profile setting influences the following points in measurement mode:
· Assignment of the function buttons
· Number of predefined functions
· Structure of the main menu
All functions are available in the standard profile. In the application-specific
measurement profiles, the available functions are reduced to only those that are
needed to ensure speedier access.
Setting a a p p rofile:
The configuration menu is open, config. is displayed.
Profile
1
Select the desired profile with
2
(approx. 2s) until config. is displayed.
to go one menu level back. To leave the configuration menu,
several times until the instrument changes to measurement view.
.
OK
/ and confirm with .
OK