Visual Signals (Led) - Reiner speed-i-Jet 798 Short Instructions

7.2

Visual Signals (LED)

Operating indication and error codes are shown by the red LED
LED
indicator
Off
On
Off
1-time
2-times
2-times
3-times
4-times
ERNST REINER GmbH & Co. KG
Condition Cause
- Compartment
for
rechargeable
batteries is
empty
- USB
connection
with the PC
does not exist
- Full charged
rechargeable
batteries are
inserted
- USB
connection
with PC
Full charged
rechargeable
batteries are
inserted
blinking short Rechargeable
in three battery warning
seconds-
rythm
blinking short Rechargeable
in three batteries are
seconds- empty
rythm
blinking long, Transferring data
then three to speed-i-Jet
seconds 798 failed
break
Recognising and Removing Interferences
charging LED continues to blink,
the rechargeable batteries
probably are defective
Removal Notes
Reset lasts approx. 4 seconds
speed-i-Jet 798 is ready to print
Rechargeable batteries almost
empty.
Remaining capacity is approx.
3 days or approx. 500 prints
Charge Printing not possible
rechargeable
batteries
Removing and If during the change of the
replacing the rechargeable batteries the
rechargeable speed-i-Jet 798 is connected to
batteries the USB interface of the PC,
the date and time of speed-i-Jet
798 will stay up to date.
Otherwise, date and time are
lost after a change of the
rechargeable batteries.Please
use the speed-i-Jet 798 PCset
to set date and time.
If after 10 minutes the green
of the speed-i-Jet 798.
39