Headlights With Wipers (Available With Auto Headlights Only); Headlight Time Delay - If Equipped - Jeep Liberty 2008 Owner's Manual

Hide thumbs Also See for Liberty 2008:
Table of Contents

Advertisement

142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE
headlights will stay on for up to 90 seconds after you turn
the ignition switch to the LOCK position. To turn the
Automatic System off, turn the end of the multifunction
control lever out of the AUTO position.
NOTE: The engine must be running before the head-
lights will turn on in the Automatic mode.
Headlights with Wipers (Available with Auto
Headlights Only)
When this feature is active, the headlights will turn on
approximately 10 seconds after the wipers are turned on
if the multifunction control lever is placed in the AUTO
position. In addition, the headlights will turn off when
the wipers are turned off if they were turned on by this
feature.
The Headlights with Wipers feature can be turned on or
off through the Electronic Vehicle Information Center
(EVIC) — if equipped. For details, refer to "Headlights
On with Wipers," under "Personal Settings (Customer
Programmable Features)" under "Electronic Vehicle In-
formation Center" in Section 4.
Headlight Time Delay — If Equipped
This feature is particularly useful when exiting your
vehicle in an unlit area. It provides the safety of headlight
illumination for about 90 seconds after turning the igni-
tion switch to the LOCK position.
To activate the delay, turn the ignition switch to the
LOCK position while the headlights are still on. Then,
turn off the headlights within 45 seconds. The delay
interval begins when you turn off the headlights. Only
the headlights will illuminate during this time.
If you turn the headlights, or parking lights, or ignition
switch ON again, the system will cancel the delay.
If you turn the headlights off before the ignition, they will
turn off in the normal manner.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Liberty 2008 and is the answer not in the manual?

Questions and answers

Table of Contents

Save PDF