Table of Contents
Advertisement
4.5 Reliability Tests
The measurement should be done after the test device has been exposed to room temperature
and humidity for one hour.
No. Item
1 Vibration test
2 Shock test
3 Heat shock cycle
test
4 Temperature
humidity bias test
(THB)
5 Low temp. storage
test (LTST)
6 High temp.
storage test
(HTST)
Product Specification Rev. 1.1
Limit
Electrical parameter should be in
specification
the same as above
the same as above
the same as above
the same as above
the same as above
PAN9420 Wi-Fi Module
4 Specification
Condition
Freq.: 20~2 000 Hz; 17g~50g /cycle,
2 hrs. each of XYZ axis
Dropped onto concrete from a height
of 1 m for 3 times
-50 °C for 30 min. and +125 °C for
300 cycles each 15 min.
+85 °C, 85 % RH, 500 h
-40 °C, 300 h
+85 °C, 300 h
Page 33
Advertisement
Table of Contents
