Port Forwarding Settings - Dell 2350 User Manual

To enable access control in the router, perform the following steps:
1. Click to select Enable MAC Access Control.
2. Click the Add button, a pop-up window will open and then enter the MAC address of
the network card on the computer on which you allow the access to the router.
3. Click Submit to enter the rule to the router.
4. To remove an existing rule, click to select edit beside MAC address.
5. A pop-up window will open and click the DEL button to remove it.
NOTE: The Access Control Settings apply to wireless client computers and not to wired
client computers.

Port Forwarding Settings

Port Forwarding Settings