Casting From Your Phone - Viotek CRESCENT User Manual

6.3 Casting from Your Phone

The projector is capable of mirroring your phone's screen or sending information from your phone's screen if desired.
To use this feature, see the following image(s) and information.
Android
Start Mirroring (AirPinCast):
Step 1. Connect the projector and phone to the same Wi-Fi network.
Step 2. Open the AirPinCast App on your projector.
Step 3. Download the AirPinCast App on your Android device. The app's full name is "DLNA/UPnP Sender -
AirPinCast".
Step 4. Install and Open the AirPinCast app.
Step 5. Look for an icon
icon. When the icon displays a number, it has detected the projector.
Step 6. After the pop-up menu shows, select the projector from the menu.
Step 7. Play any video or fi le through the AirPinCast app
Starting Mirroring (MiraCast):
Step 1. Connect the projector and phone to the same Wi-Fi network.
Step 2. On your Android device, swipe down from the top of your screen to open the Quick Access Menu.
Step 3. From the Quick Access Menu, touch the "Cast" icon
Step 4. Select your projector and allow time to connect.
The "Cast" icon may look diff erent depending on your Android device.
Ending Mirroring:
Step 1. On your Android device, swipe down from the top of your screen to open the Quick Access Menu.
Step 2. From the Quick Access Menu, touch the "Cast" icon
iOS
Starting Mirroring (AirPlay):
Step 1. Connect the projector and phone to the same Wi-Fi network.
Step 2. Open the AirPinCast App on your projector.
Step 3. On your iOS device, swipe up from the bottom of your screen to open the menu.
Step 4. For mirroring, select "AirPlay Mirroring" from the menu and skip to Step 7. For AirPlay without mirroring,
continue to the next step.
Step 5. From the menu, swipe horizontally to reach the "Now Playing" screen.
Step 6. Touch the bottom bar to open a new section of the menu then select your projector to connect.
Step 7. Play content as desired.
Ending Mirroring:
Step 1. On your iOS device, swipe up from the bottom of your screen to open the menu.
Step 2. From the menu, swipe horizontally to reach the "Now Playing" screen.
Step 3. Tap the bottom bar to open a new section of the menu then select your iOS device.
The AirPinCast app does not need to be downloaded on your iOS device. For casting via iOS, see the steps above.
When mirroring, your projector uses your mobile device's screen orientation and aspect ratio. For any projection image issues, you may need to
adjust the projector's aspect ratio or zoom settings.
12
in the upper right hand corner. Wait for the icon to display a number, then touch the
. The menu will show available devices.
to disable casting.