Page 1
Run Extension Support 017.1101 Step 1 - Unclip the end of your run If you already have a complete Eglu Go Up run, you will need to unclip the end and corner skirts. (Keep the clips, you will need them later.) Also, remove the feeder and drinker.
Page 2
REPEAT ON OTHER SIDE Step 3 - Attach Top Panels Clip on 2 Top Panels. Top Panel Front 017.1085 If you have any problems assembling your Eglu Go www.omlet.co.uk Page 2 call us on 0845 450 20 56 or email info@omlet.co.uk...
Page 3
Step 5 - Re-attach the panels removed in Step 1 Re-attach the end of the run using the clips that were holding it on before. If you have any problems assembling your Eglu Go Page 3 www.omlet.co.uk call us on 0845 450 20 56 or email info@omlet.co.uk...
Page 4
Diagram Showing all Run Clip locations www.omlet.co.uk Page 4...
Need help?
Do you have a question about the Eglu Go Up and is the answer not in the manual?
Questions and answers