There are several parameter types available in DB3010. The way of editing depends of the
parameter type. Every parameter type has its own editing rules.
Numerical parameter
Represents numerical value.
Example: The value Frequency can be changed in the range of 87.10 MHz to 108.10 MHz and
Frequency Step of 10 kHz, 20 kHz, 50 kHz or 100 kHz.
Front panel buttons usage:
[UP] / [DOWN] – Change the value of the parameter with one step. The step value may vary
depending on the selected parameter. The value always stays in permitted parameter range;
[OK] – Accept the changed value and exit edit mode;
[SB4] – will discard the value and cancel edit mode.
Enumerated parameter
Represent the selection of a value among set of predefined enumerated values.
Example: The value Attenuator can be selected from Auto, OFF, -10dB, -20dB and -30dB.
Front panel buttons usage:
[UP] / [DOWN] – Cycle through the possible values;
[OK] – Accept the changed value and exit edit mode;
[SB4] – will discard the value and cancel edit mode.
IP address
Represents an IPv4 address.
Example:
Front panel buttons usage:
[LEFT] / [RIGHT] – Select edit marker position;
[UP] / [DOWN] – Cycle through the possible values;
[OK] – Accept the changed value and exit edit mode;
[SB4] – Discards all changes and cancels edit mode.
IP port
Represents TCP or UDP port.
Example:
Front panel buttons usage: Refer to IP address.
Date
Represent date from the calendar.
Example:
Front panel buttons usage:
[LEFT] / [RIGHT] – Selects previous/next segment from the date;
[UP] / [DOWN] – Cycle through the possible values;
[OK] – Accept the changed value and exit edit mode;
[SB4] – Discards all changes and cancels edit mode.
Time
Represent time information.
Example:
Front panel buttons usage: Refer to Date.
65 Aleksandar Stamboliyski Str., 8000 Bourgas, Bulgaria
Tel: +359 56 820027, Fax: +359 56 836700
E-mail: office@devabroadcast.com ,Web: www.devabroadcast.com
,
- 20 -
Need help?
Do you have a question about the DB3010 and is the answer not in the manual?
Questions and answers