Page 1
& ATOHM SUBWOOFERS Congratulations on your purchase of an Atohm product. A great deal of effort has gone into designing and manufacturing this product to the highest possible standards to suit your requirements, whether it be for your stereo, multichannel, hi-fi or home theater system.
PRECAUTIONS, WARNINGS: Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
SUBWOOFER PLACEMENT : As a general rule we advise you to place your subwoofer at the front of the room, in line with the main speakers. Getting closer to a wall, and even more to a corner, will naturally amplify the sound of the subwoofer. Therefore, the position labeled “3+”...
Intermediate protection (s250 module, or specific uses of s500 module) OFF : No mechanical protection WARNING: For specific uses only, do not employ this setting for any factory model or Atohm subwoofer kit (may result in loudspeaker mechanical breakdown, see exclusions of warranty). U-MAX (14) 0dB Position: Nominal voltage limit (maximum voltage: 27.5Vrms/s250 and 42.5Vrms/s500)
TECHNICAL SPECIFICATIONS AND DIMENSIONS Model : S250 S500 RMS power /4ohms/20Hz to 20kHz 220 Watts 500 Watts (cold start/ 80s duration/ direct mode) Nominal load impedance 4-16 ohms 4-16 ohms Minimal load impedance 3 ohms 3 ohms Frequency response (direct mode) 20Hz-20kHz (+/- 0.2dB)
Page 6
Purchase Date: Dealer’s name and commercial stamp: Product Reference: Serial N°: ATOHM is a registered French trademark Manufactured and distributed by WELCOHM TECHNOLOGY 12 rue du Breuil, 70150 PIN (France) Tel : +33 3 81 47 91 01 WWW. ATOHM.COM...
Need help?
Do you have a question about the S250 and is the answer not in the manual?
Questions and answers