Setup; Part Names And Functions; Led Indicator; Touchpanel - Panasonic KX-HNK101 Operating Instructions Manual

Part names and
functions
E
A
B
C
D
F
M N
Used when registering the keypad
to the hub.
Volume
Used to adjust the volume of the
sounds emitted by the keypad.
Speaker

LED indicator

Touchpanel

DC jack
LED indicator
You can use the LED indicator to
confirm the keypad's status.
Indicator Status
Off Normal operation or no
power.
Red, Keypad is not
blinking registered to a hub.
slowly
For assistance, please visit www.panasonic.com/support
Indicator Status
Red, Keypad is out of range
blinking of the hub.
Red, Alarm system was
blinking triggered.
quickly
Green, Registration mode
blinking (You pressed and held
M N)
Touchpanel
The buttons on the touchpanel allow
you to confirm and change the
system's current alarm mode.
By default, the button corresponding to
the current alarm mode is lit during
normal operation and no other buttons
are lit. When you tap the touchpanel,
the buttons for all the alarm modes light
for 10 seconds to allow you to control
the keypad, then dim again.
Button Status
None No power, or buttons
displayed
are turned off
Normal operation,
, lit
[Arm: At Home] mode
is selected.
Normal operation,
, lit
[Arm: Away] mode is
selected.
Normal operation,
, lit
[Disarm] mode is
selected.
Alarm system was
,
triggered.
blinking

Setup

*1 .
7