Action
4 Replace back
cover and slide
into place until it
locks.
Charging the Battery using the
Travel Charger
New batteries are shipped partially charged. Before you
can use your communicator, you need to install and charge
the battery, as indicated by the following instructions.
Some batteries perform best after several charge/
discharge cycles.
Action
1 Plug the charger
in with the
release tab up.
2 Plug the other end into an electrical outlet. While
the battery is charging, Charging Battery and the
battery's current charge level (Very Low to High)
display on the screen.
3 When Charging Complete displays, press the
release tab and remove the charger.
22