Table of Contents
Advertisement
TWIN LOOPER manual
Thanks for purchasing our product, please read the operating instructions below carefully before
operate.
1. Right footswitch
1) Right foot switch functions need to use with
2) When the mode selection switch select STOP mode, right footswitch is used to stop
recording and playback, or clear recording data, Using with
operation can not be restored.
3) When recording (LOOPER indicator LED is red) or playing (LOOPER indicator LED is green),
press right footswitch once, recording or playing will immediately stop, LOOPER indicator LED is
green and flashing.
4) If stopped (LOOPER indicator LED is green and flashing), press right footswitch about 2
seconds, LOOPER indicator LED flashes twice, then all of the recorded data is cleared.
mode selection switch: FX / STOP
LOOPER indicator LED, this
1 / 7
Advertisement
Table of Contents
Related Manuals for Rowin TWIN LOOPER
Summary of Contents for Rowin TWIN LOOPER
- Page 1 TWIN LOOPER manual Thanks for purchasing our product, please read the operating instructions below carefully before operate. 1. Right footswitch 1) Right foot switch functions need to use with mode selection switch: FX / STOP 2) When the mode selection switch select STOP mode, right footswitch is used to stop...
- Page 2 5) When the mode selection switch selects the FX mode, the right footswitch control effect on and off, using with the FX status indicator LED. 6) If the FX LED lights up, indicate effect on, press once, effect turned off, presses again, effect turned on.
- Page 3 In recording mode, press left footswitch about 2 seconds, the current recorded data will be cleared, LOOPER indicator LED flashes twice and then go out. In playing or overdub state, press left footswitch about 2 seconds LOOPER indicator LED flashes twice and then undo (or redo) the recorded data last time.
- Page 4 1）LOOPER status indicators LED need to work with left footswitch. 2) In recording state: LOOPER indicator LED is red. 3) In playing state: LOOPER indicator LED is green. 4) In overdub state: LOOPER indicator LED is red. 5) In stop state: if there is recorded data, LOOPER status indicator LED is flashing green, if no recorded data, LOOPER status indicator LED goes off.
- Page 5 （1） （2） 2) When the mode selection switch select FORWARD mode, if the effect is on, effect indicator LED is red, meaning that it is playing in the normal mode, such as when the sound recording is: 123,then 123 will be played. 3) When the mode selection switch select REVERSE mode , if the effect is on, FX effect indicator LED is green, meaning that it is playing in the opposite direction, such as when the...
- Page 6 2) turn The 11 gears knob to the leftmost (minimum), press the right footswitch once, the green light turned into yellow light. Then the 1st gear has been corrected. 3) Turn the 11 gears knob to the right (turn to the second gear), press the right footswitch once, the green LED turned into yellow.
- Page 7 When practicing at home, you can download a sound you like to play as background sound, convenient and practical. You can also upload recorded sound to computer as creative materials. Working Current: 90mA Input impedance: 470K Ω Output impedance: 100Ω Weight: 522g (with box) Dimensions: 116*90*35mm Accessories: 1.
Need help?
Do you have a question about the TWIN LOOPER and is the answer not in the manual?
Questions and answers