Getting Started - ABB ARR600 Quick Start Manual

Getting started

Power-up and SIM card installation
Insert the SIM card. Push the yellow button in the SIM card
slot to eject the SIM card tray. Insert the SIM card to the
tray (contacts facing up) and push it firmly and carefully
back to its holder. Attach the power supply and switch the
device on. Under normal circumstances, the device is able
to automatically connect to the operator's cellular network.
In problem situations you can log in to the Arctic Web user
interface by using Web browser and navigating to Network →
Mobile WAN.
If your SIM card requires a PIN code, do not install it
before you have configured the Arctic device PIN code
settings.
Login to the Arctic Web user interface
Connect the Ethernet cable between the Arctic device LAN
port and your computer.
Figure 1. Browser https example
Figure 2. Welcome page in the ARG600 Web user interface
2 Quick Start Guide | ARG600/ARR600
Configure your computer to use the same IP address space
as the Arctic device. For example, your computer IP could
be 10.10.10.11 with netmask 255.255.255.0. Check the
connection with the ping command.
Connect to the Arctic device using the Web browser. The
default address of the Arctic device is https://10.10.10.10/.
Remember to use https and not http.
Accept the self-signed certificate in the browser.
Log in to the device. The username is arctic-adm and the
default password is arcticm2m.
It is highly recommended that the default password is
changed before the product is connected to a public
cellular network.